NAME

    Printer::ESCPOS - Interface for all thermal, dot-matrix and other
    receipt printers that support ESC-POS specification.

VERSION

    version 0.012

SYNOPSIS

    If you are just starting up with POS RECEIPT Printers, you must first
    refer to Printer::ESCPOS::Manual to get started.

    Printer::ESCPOS provides four different types of printer connections
    to talk to a ESCPOS printer. Among these connection types 'Serial',
    'Network', 'File' are already implemented in this module. 'USB' type
    using Device::USB module is under development. In the meantime most
    of the printing tasks for USB connected printer can be achieved using
    the 'File' connection mode for usb connected ESCPOS printers.

         use Printer::ESCPOS;
     
         use Data::Dumper; # Just to get dumps of status functions.
     
     
         #########################################################
         BEGIN: Network Printer
         #########################################################
         # For Network Printers $port is 9100 in most cases but might differ depending on how 
         # you have configured your printer
         my $printer_id = '192.168.0.10';
         my $port       = '9100';
         my $device = Printer::ESCPOS->new(
             driverType => 'Network',
             deviceIp   => $printer_ip,
             devicePort => $port,
         );
         $device->printer->init(); # This calls the initialization functions for your printer.
     
         # These commands won't actually send anything to the printer but will store all the 
         # merged data including control codes to module buffer.
         $device->printer->printAreaWidth( nL => 0, nH => 1);
         $device->printer->text("Print Area Width Modified\n");
         $device->printer->printAreaWidth(); # Reset to default
         $device->printer->text("print area width reset\n");
         $device->printer->tab();
         $device->printer->underline(1);
         $device->printer->text("underline on\n");
         $device->printer->invert(1);
         $device->printer->text("Inverted Text\n");
         $device->printer->justification('right');
         $device->printer->text("Right Justified\n");
         $device->printer->upsideDown(1);
         $device->printer->text("Upside Down\n");
         $device->printer->cutPaper();
     
         $device->printer->print(); # Dispatch the above commands from module buffer to the Printer. 
                                    # This command takes care of read text buffers for the printer.
     
     
         #########################################################
         BEGIN: Serial Printer
         #########################################################
         # Use the Serial mode for local printer connected on serial port(or a printer connected via 
         # a physical USB port in USB to Serial mode), check syslog(Usually under /var/log/syslog) 
         # for what device file was created for your printer when you connect it to your system(For 
         # plug and play printers).
         my $path = '/dev/ttyACM0';
         $device = Printer::ESCPOS->new(
             driverType     => 'Serial',
             deviceFilePath => $path,
         );
         $device->printer->init(); # This calls the initialization functions for your printer.
     
         say Dumper $device->printer->printerStatus();
         say Dumper $device->printer->offlineStatus();
         say Dumper $device->printer->errorStatus();
         say Dumper $device->printer->paperSensorStatus();
     
         $device->printer->bold(1);
         $device->printer->text("Bold Text\n");
         $device->printer->bold(0);
         $device->printer->text("Bold Text Off\n");
     
         $device->printer->print();
     
     
         #########################################################
         BEGIN: File(Direct to Device File) Printer
         #########################################################
         # A 'File' driver is similar to the 'Serial' driver in all functionality except that it 
         # doesn't support the status functions for the printer. i.e. you will not be able to use 
         # printerStatus, offlineStatus, errorStatus or paperSensorStatus functions
         my $path = '/dev/usb/lp0';
         $device = Printer::ESCPOS->new(
             driverType     => 'File',
             deviceFilePath => $path,
         );

DESCRIPTION

    You can use this module for all your ESC-POS Printing needs. If some
    of your printer's functions are not included, you may extend this
    module by adding specialized funtions for your printer in it's own
    subclass. Refer to Printer::ESCPOS::Roles::Profile and
    Printer::ESCPOS::Profiles::Generic

ATTRIBUTES

 driverType

    "Required attribute". The driver type to use for your printer. This
    can be File, Network or Serial. USB driver is not implemented yet. If
    you choose File or Serial driver, you must provide the
    deviceFilePath, for Network driver you must provide the printerIp and
    printerPort.

    Network driver type:

        my $printer_id = '192.168.0.10';
        my $port       = '9100';
        my $device = Printer::ESCPOS->new(
            driverType => 'Network',
            deviceIp   => $printer_ip,
            devicePort => $port,
        );

    Serial driver type:

        my $path = '/dev/ttyACM0';
        $device = Printer::ESCPOS->new(
            driverType     => 'Serial',
            deviceFilePath => $path,
        );

    File driver type:

        my $path = '/dev/usb/lp0';
        $device = Printer::ESCPOS->new(
            driverType     => 'File',
            deviceFilePath => $path,
        );

 profile

    There are minor differences in ESC POS printers across different
    brands and models in terms of specifications and extra features. For
    using special features of a particular brand you may create a sub
    class in the name space Printer::ESCPOS::Profiles::* and load your
    profile here. I would recommend extending Generic (
    Printer::ESCPOS::Profiles::Generic ). Use the following classes as
    examples. Printer::ESCPOS::Profiles::Generic
    Printer::ESCPOS::Profiles::SinocanPSeries

    Note that your driver class will have to implement the
    Printer::ESCPOS::Roles::Profile Interface. This is a Moose Role and
    can be included in your class with the following line.

        use Moose;
        with 'Printer::ESCPOS::Roles::Profile';

    By default the generic profile is loaded but if you have written your
    own Printer::ESCPOS::Profile::* class and want to override the
    generic class pass the profile Param during object creation.

        my $device = Printer::ESCPOS->new(
            driverType => 'Network',
            deviceIp   => $printer_ip,
            devicePort => $port,
            profile    => 'USERCUSTOM'
        );

    The above $device object will use the
    Printer::ESCPOS::Profile::USERCUSTOM profile.

 deviceFilePath

    File path for UNIX device file. e.g. "/dev/ttyACM0" this is a
    mandatory parameter if you are using File or Serial driverType.

 deviceIP

    Contains the IP address of the device when its a network printer. The
    module creates IO:Socket::INET object to connect to the printer. This
    can be passed in the constructor.

 devicePort

    Contains the network port of the device when its a network printer.
    The module creates IO:Socket::INET object to connect to the printer.
    This can be passed in the constructor.

 baudrate

    When used as a local serial device you can set the baudrate of the
    printer too. Default (38400) will usually work, but not always.

 serialOverUSB

    Set this value to 1 if you are connecting your printer using the USB
    Cable but it shows up as a serial device and you are using the Serial
    driver.

 vendorId

    USB Printers VendorId. use lsusb command to get this value

 productId

    USB Printers product Id. use lsusb command to get this value

 endPoint

    USB endPoint to write to.

 timeout

    Timeout for bulk write functions for the USB printer.

 printer

    Use this attribute to send commands to the printer

        $device->printer->setFont('a');
        $device->printer->text("blah blah blah\n");

USAGE

    Refer to the following manual to get started with Printer::ESCPOS

      * Printer::ESCPOS::Manual

 Quick usage summary in steps:

      1. Create a device object $device by providing parameters for one
      of the supported printer types. Call $device->printer->init to
      initialize the printer.

      2. call text() and other Text formatting functions on
      $device->printer for the data to be sent to the printer. Make sure
      to end it all with a linefeed $device->printer->lf().

      3. Then call the print() method to dispatch the sequences from the
      module buffer to the printer

         $device->printer->print()

    Note: While you may call print() after every single command code,
    this is not advisable as some printers tend to choke up if you send
    them too many print commands in quick succession. To avoid this,
    aggregate the data to be sent to the printer with text() and other
    text formatting functions and then send it all in one go using
    print() at the very end.

NOTES

      * In Serial mode if the printer prints out garbled characters
      instead of proper text, try specifying the baudrate parameter when
      you create the printer object. The default baudrate is set at 38400

         $device = Printer::ESCPOS->new(
             driverType     => 'Serial',
             deviceFilePath => $path,
             baudrate       => 9600,
         );

      * For ESC-P codes refer the guide from Epson
      http://support.epson.ru/upload/library_file/14/esc-p.pdf

SUPPORT

 Bugs / Feature Requests

    Please report any bugs or feature requests through github at
    https://github.com/shantanubhadoria/perl-printer-escpos/issues. You
    will be notified automatically of any progress on your issue.

 Source Code

    This is open source software. The code repository is available for
    public review and contribution under the terms of the license.

    https://github.com/shantanubhadoria/perl-printer-escpos

      git clone git://github.com/shantanubhadoria/perl-printer-escpos.git

AUTHOR

    Shantanu Bhadoria <shantanu@cpan.org>
    https://www.shantanubhadoria.com

CONTRIBUTOR

    Shantanu Bhadoria <shantanu att cpan dott org>

COPYRIGHT AND LICENSE

    This software is copyright (c) 2015 by Shantanu Bhadoria.

    This is free software; you can redistribute it and/or modify it under
    the same terms as the Perl 5 programming language system itself.