GRASS logo

Note: A new GRASS GIS stable version has been released: GRASS GIS 7. Go directly to the new manual page here

NAME

i.vpoints - Set registration points for an imagery group from a vector map or keyboard entry.

KEYWORDS

imagery, geometry

SYNOPSIS

i.vpoints
i.vpoints help
i.vpoints group=string [--verbose] [--quiet]

Parameters:

group=string
Name of imagery group to be registered

DESCRIPTION

This program enables the user to identify coordinate pairs of points from a vector map or keyboard entry and corresponding points in an image to be rectified. The map coordinate values of each point are used to calculate a transformation matrix. The operator may then use the i.rectify program to rectify the image using the transformation matrix coefficients calculated from the control point file created in i.vpoints. The i.rectify program performs a first, second or third order transformation of the image.

The first step is to display the unrectified image and corresponding vector map data. The operator would then mark corresponding control point locations on the image and map. To identify the precise location of a point to be marked, i.vpoints has a zoom option. In addition to marking control points on an image to be rectified and inputting their world coordinate values using the keyboard, i.vpoints has the option to simultaneously display vector map data available in the targeted database, and identify on the vector map the location of the corresponding marked points. When this option is chosen, the coordinate values are input automatically. Any GRASS map layer or vector map in the targeted database LOCATION can be displayed using i.vpoints. The i.vpoints program also has the capability of overlaying (i.e., warping) the vector data onto the raster image to visually check the accuracy of the registration based on the current set of active control points. During the process of marking points and entering map coordinates, the user can compute the RMS (root mean square) error for each point entered. The i.vpoints program does this by calculating a transformation equation (the same one that is calculated in the GRASS program i.rectify 2). Coefficients are computed for the equation. The coefficients are then used in the equation along with the x,y coordinates of the marked points. The results are plugged into an equation for RMS error. The interpretation of RMS error is described in the ANALYZE subsection.

The procedures for marking control points (registration points), displaying vector map layers, overlaying vector maps onto the raster image, and calculating RMS error are described in the following sections .

To enter the program (the i.vpoints program requires the use of a graphics monitor) type i.vpoints:

i.vpoints
The first prompt in the program asks for the imagery group to be registered . . .
     Enter imagery group to be registered
     Enter 'list' for a list of existing imagery groups
     Enter 'list -f' for a verbose listing
     Hit RETURN to cancel request
     >
For example,
>list
might produce the following response:
     <list>
     Available groups
     - - - - - - - - - - - - - - - - - - - - - - - - - -
     test
     - - - - - - - - - - - - - - - - - - - - - - - - - -
     hit RETURN to continue -->
whereas,
>list -f
might produce the following response
     Available groups
     - - - - - - - - - - - - - - - - - - - - - - - - - -
     test
         photo in PERMANENT
         res2 in tifftest
     - - - - - - - - - - - - - - - - - - - - - - - - - -
     hit RETURN to continue -->
The imagery group entered above should contain the files that you wish to rectify. After entering the group to be registered, the terminal screen displays the message:
     >test
     <test>
     Use mouse now . . .
And the color graphics monitor displays the following screen:

Any single file in the imagery group may be used to mark points, and points can be marked on more than one file in the imagery group to accumulate the suggested minimum number of points (3 for a 1st order transformation, 6 for a 2nd order, and 10 for a 3rd order). Any file in the imagery group can be subsequently rectified (using i.rectify) based on the transformation matrix computed from these points.

The chosen file is displayed in the upper left quadrant of the monitor at a default magnification based on the extent of the current active window.

RASTER IMAGE

The raster image option on the menu at the bottom of the window allows the user to display any single file in the imagery group in the upper right quadrant of the window screen. The option provides the same file selection pick list as is presented when you first enter the i.vpoints program. When you select this option, the program will erase the data contained in all of the four quadrant windows and will reinitialize all program values.

VECTOR MAPS

The vector maps option on the menu at the bottom of the screen allows the user to display vector map data in the upper right quadrant of the screen. After selecting the vector map layer to display, a menu selection bar appears along the bottom on the screen. This pick list is used to select the line color (blue, gray, green, red, white, or yellow) for the selected vector data layer.

Refresh

The refresh option on the main menu allows the user to "refresh" or re-draw the displayed vector data. This function will erase all outlines showing the limits of previously zoomed areas. A "yes/no" roompt will appear:

     Refresh Map ?       NO   YES

Zoom

To enlarge a raster or vector image, place the mouse cross hairs on the word zoom on the main menu and press the left button. The following menu will be displayed at the bottom. of the screen:

     CANCEL   BOX   POINT      Select type of zoom
You have the option to identify the map extent of the zoom window using either the mouse to define a box, or the mouse to mark a center point from which to enlarge the image. The box option first prompts you to identify a starting corner for the zoom region and then allows you to define the area to be zoomed using a rubber band box. The prompts appear as follows...
     CANCEL    Mark the first corner of region

     CANCEL     Define the region
After marking the first corner of the region to be enlarged, hold down the left button and move the mouse to change the size and shape of the rubber band box. After defining the area to be enlarged, press the right button to accept it.

The point method for enlarging an image will display a mouse menu to guide you in selecting the appropriate enlargement. To enlarge or reduce the magnification factor, place the cursor on the "+" or "-" box and press the left button on the mouse.

You may zoom either the raster or the vector display.

Upon accepting the new region limits, the raster or vector data are redisplayed in either the lower left (raster) or lower right (vector) windows.

The extent of the zoomed area is outlined on the unzoomed image in the main window area.

While the main menu is displayed, you can mark corrosponding control points on the raster and vector images or enter map coordinates from the keyboard. If you are using coordinates taken from a reference map, circle these points and then use whatever means you have available to identify as precisely as possible the coordinate values for these points. Digitizing software is recommended, especially GRASS v.digit. Once you have determined the standard coordinates (for example, UTM's) of each circled point, you are ready to mark the points on the displayed image.

To mark the points on the image, that correspond to the points on the standard coordinate map, place the mouse cross hairs on the point on the image to be marked (you will probably have to ZOOM to find the exact spot) and press the left hand button on the mouse. A diamond shaped symbol will be marked on the image. The text monitor will display the following screen:

          Point 1 marked on the image at
          East:  1023.77
          North:  -164.41

          Enter coordinates as east north:
Analyze

After a number of points have been marked (a minimum of 4 for a 1st order transformation, 7 for a 2nd order, and 11 for a 3rd order), the RMS error of the points marked on the image can be checked. This is done by placing the cross hairs on the word ANALYZE on the main menu at the bottom of the monitor. The following error report is superimposed on the monitor:


   error                      image                target
  #    col  row target   east      north       east      north 
     
  1   -0.9  0.0  1.0   1048.5     -144.8   679132.5  4351080.6
  2    1.0  0.4  1.3   2153.1     -567.2   684314.7  4399001.4
  .
  .
  .
          Overall rms error  76.85
The RMS error for the image being rectified is recorded under the column "error" and subTITLEd "row' and "col". In the above report, the marked point number 1 is 0.0 rows and -0.9 columns from the predicted location calculated by the transformation equation. The RMS error for the target database map is recorded under the heading "error" and the subheading "target". This is the RMS error for the east and the north coordinate values of the target map, but it is represented in the table using one general value. The overall RMS error for the image is displayed at the bottom of the screen in meters. Points that generate a high RMS error are displayed in red on the monitor. The x,y coordinate values of the point marked on the image being rectified are recorded under the heading "image" and the subheadings "east" and "north". The standard coordinate values of the point in the target database are recorded under the heading "target" and the subheadings "east" and "north". If the user would like to exclude or include a point, this can be accomplished by placing the mouse cross hairs on the point number to be included (if the point is absent) or excluded (if the point is displayed) and then pressing the left button on the mouse twice. When a point is excluded, it is not included in the calculation of the RMS error, or included in the final transformation matrix. However, it can be retrieved within i.vpoints at any time by double clicking with the mouse as described above.

The following menu appears at the bottom of the monitor:

   DONE   PRINT   FILE   OVERLAY   DELETE ON       Transformation -
->   1st ORDER   Double click on point to be DELETED
Selecting DELETE ON will toggle the option to DELETE OFF, the toggle option is used to allow the user to physically remove a control point from the POINTS file instead of just flagging it as an non-active reference point.

Overlay

Overlay allows the user to overlay the vector map(s) onto the raster image. Overlay can be used to warp (register) and display the selected vector map data on top of the raster image contained in the upper left window of the color screen. An inverse coordinate transformation is performed using the currently active order of transformation (i.e., first, second, or third).

     Overlay vectors on raster image   NO   YES
By selecting the 1st ORDER option, the user may select the order of transformation desired:
     Select order of transformation --> 1st Order 2nd Order 3rd Order
The program will immediately recalculate the RMSE and the number of points required.

Quit

To exit the i.vpoints program, place the mouse cross hairs on the word QUIT at the bottom of the monitor and all of the marked points (including coordinates) will be saved.

SEE ALSO

The GRASS 4 Image Processing manual

g.mapsets, i.group, i.points, i.rectify, i.target
gis.m: GEORECTIFY TOOL and wxGUI: Manage Ground Control Points

AUTHOR

William R. Enslin, Michigan State University Center for Remote Sensing
Radim Blazek (update to GRASS 5.7)
Hamish Bowman (finish GRASS 6 porting)

Last changed: $Date: 2011-11-08 03:29:50 -0800 (Tue, 08 Nov 2011) $


Main index - imagery index - Full index

© 2003-2016 GRASS Development Team