GRASS logo

Note: A new GRASS GIS stable version has been released: GRASS GIS 7. Go directly to the new manual page here

NAME

r.topmodel - Simulates TOPMODEL which is a physically based hydrologic model.

KEYWORDS

raster, hydrology

SYNOPSIS

r.topmodel
r.topmodel help
r.topmodel [-i] [basin=string] [elevation=string] [depressionless=string] [direction=string] [belevation=string] [topidx=string] [nidxclass=integer] idxstats=string parameters=string input=string output=string [Qobs=string] [timestep=integer] [idxclass=integer] [--overwrite] [--verbose] [--quiet]

Flags:

-i
Input data given for (o/i)
--overwrite
Allow output files to overwrite existing files
--verbose
Verbose module output
--quiet
Quiet module output

Parameters:

basin=string
(i) Basin map created by r.water.outlet (MASK)
elevation=string
(i) Elevation map
depressionless=string
(o) Depressionless elevation map
direction=string
(o) Direction map for depressionless elevation map
belevation=string
(o/i) Basin elevation map (MASK applied)
topidx=string
(o) Topographic index ln(a/tanB) map (MASK applied)
nidxclass=integer
(i) Number of topographic index classes
Default: 30
idxstats=string
(o/i) Topographic index statistics file
parameters=string
(i) TOPMODEL Parameters file
input=string
(i) Rainfall and potential evapotranspiration data file
output=string
(o) Output file
Qobs=string
(i) OPTIONAL Observed flow file
timestep=integer
(i) OPTIONAL Output for given time step
idxclass=integer
(i) OPTIONAL Output for given topographic index class

DESCRIPTION

r.topmodel simulates TOPMODEL which is a physically based hydrologic model.

Note: (i) means input; (o) means output; (o/i) means input or output

The -i flag indicates that input data are given for (o/i). Without this flag, all inputs (i) and intermediate outputs (o/i) should be given. For example, [belevation] map will be created from [elevation] and [basin] in every run. However, given the same [elevation] and [basin], [belevation] output will be the same all the time, so r.topmodel can directly take [belevation] as an input with this flag to save time.

Selected Parameters:

depressionless map is created as follows:
r.fill.dir input=elevation elev=depressionless dir=direction type=grass
This option can be omitted if [elevation] map is already depressionless.

belevation map is created from [elevation] with [basin] mask applied:
r.mapcalc "belevation = if(basin == 0 || isnull(basin), null(), elevation)"

topidx map is created as follows:
r.topidx input=elevation output=topidx

Qobs
Compare simulated flows with observed flows and calculate model efficiency.

REFERENCES

K. Beven, R. Lamb, P. Quinn, R. Romanowicz, and J. Freer. TOPMODEL, in V.P. Singh (Ed.). Computer Models of Watershed Hydrology. Water Resources Publications, 1995.

S.C. Liaw, Streamflow simulation using a physically based hydrologic model in humid forested watersheds (Dissertation). Colorado State University, CO. p163, 1988.

SEE ALSO

r.fill.dir, r.mapcalc, r.topidx
How to run r.topmodel

AUTHORS

Main algorithm sources are rewritten in C based on TMOD9502.FOR.
Thanks to Keith Beven.

GRASS port by Huidae Cho
Hydro Laboratory, Kyungpook National University, South Korea

Last changed: $Date: 2016-03-22 11:33:32 -0700 (Tue, 22 Mar 2016) $


Main index - raster index - Full index

© 2003-2016 GRASS Development Team