GRASS logo

Note: A new GRASS GIS stable version has been released: GRASS GIS 7.8, available here.
Updated manual page: here

wxGUI Raster Digitizer

Table of contents

KEYWORDS

display, GUI, raster, editing, digitizer

DESCRIPTION

Raster Digitizer is a simple tool to quickly to draw lines, areas, and circles and save these features in a raster map. It is accessible from Map Display toolbar (from the combo box on the right).

Raster Digitizer currently allows you to:

The typical workflow includes these steps:

  1. Set computational region as needed.
  2. Switch to Raster Digitizer and select a map to create. Select either a new raster or create a new raster from existing raster, also select raster type (CELL, FCELL, DCELL)
  3. Specify category value and width before drawing a feature
  4. Specify digitizing tool (area, line, point)
  5. Start digitizing and when you want to finish area or line, use right click
  6. Change color of temporary overlay depending on your needs
  7. Set different category and repeat
  8. At any point you can use Undo or Save
  9. If existing raster is used for the new raster, digitized areas will respect the color table, but you can always set different color table.

NOTES

Raster Digitizer respects computational region including the currently set resolution.

EXAMPLES

In the following figures we start with elev_lid792_1m raster map in North carolina sample dataset and digitize two buildings, one rectangular and one with circular footprint. Both buildings have the roof level at 130 m. We set the width when digitizing the point to 50 meters which results in the building having 50 m in diameter. When we are done with digitizing, we save the result and explore cast shadows of the buildings with r.sun module:
g.region raster=elev_lid792_1m
# now create elev_edited raster by digitizing and save
r.slope.aspect elevation=elev_edited slope=elev_slope aspect=elev_aspect
r.sun elevation=elev_edited aspect=elev_aspect slope=elev_slope beam_rad=beam day=172 time=6
Raster digitizer example step 1 Raster digitizer example step 2 Raster digitizer example step 3 Raster digitizer example step 4 Raster digitizer example step 5
Figure: Steps to digitize new buildings on elev_lid792_1m raster map.

SEE ALSO

wxGUI
wxGUI components,
r.in.poly (backend of digitizer),
g.gui.vdigit

AUTHOR

Anna Petrasova, NCSU GeoForALL Laboratory

$Date$

SOURCE CODE

Available at: wxGUI Raster Digitizer source code (history)


Note: A new GRASS GIS stable version has been released: GRASS GIS 7.8, available here.
Updated manual page: here

Main index | Wxgui index | Topics index | Keywords index | Graphical index | Full index

© 2003-2020 GRASS Development Team, GRASS GIS 7.6.2dev Reference Manual