Note: This document is for an older version of GRASS GIS that will be discontinued soon. You should upgrade, and read the current manual page.
NAME
r.profile - Outputs the raster map layer values lying on user-defined line(s).
KEYWORDS
raster,
profile,
transect
SYNOPSIS
r.profile
r.profile --help
r.profile [-gc] input=name [output=name] [coordinates=east,north[,east,north,...]] [file=name] [resolution=float] [null_value=string] [units=string] [--overwrite] [--help] [--verbose] [--quiet] [--ui]
Flags:
- -g
- Output easting and northing in first two columns of four column output
- -c
- Output RRR:GGG:BBB color values for each profile point
- --overwrite
- Allow output files to overwrite existing files
- --help
- Print usage summary
- --verbose
- Verbose module output
- --quiet
- Quiet module output
- --ui
- Force launching GUI dialog
Parameters:
- input=name [required]
- Name of input raster map
- output=name
- Name of file for output (use output=- for stdout)
- Default: -
- coordinates=east,north[,east,north,...]
- Profile coordinate pairs
- file=name
- Name of input file containing coordinate pairs
- Use instead of the 'coordinates' option. "-" reads from stdin.
- resolution=float
- Resolution along profile (default = current region resolution)
- null_value=string
- String representing NULL value
- Default: *
- units=string
- Units
- If units are not specified, current location units are used. Meters are used by default in geographic (latlon) locations.
- Options: meters, kilometers, feet, miles
This program outputs two or four column (with
-g) data to stdout or
an ASCII file. The default two column output consists of cumulative profile
length and raster value. The optional four column output consists
of easting, northing, cumulative profile length, and raster value. Profile
end or "turning" points can be set manually with the
coordinates
argument. The profile resolution, or distance between profile
points, is obtained from the current region resolution, or can be manually
set with the
resolution argument.
The coordinates parameter can be set to comma separated geographic
coordinates for profile line endpoints.
Alternatively the coordinate pairs can be piped from the text file specified
by file option, or if set to "-", from stdin.
In these cases the coordinate pairs should be given one comma separated pair
per line.
The resolution parameter sets the distance between each profile point
(resolution). The resolution must be provided in GRASS database units (i.e.
decimal degrees for Lat Long databases and meters for UTM). By default
r.profile uses the resolution of the current GRASS region.
The null parameter can optionally be set to change the character
string representing null values.
The multi column output from
r.profile is intended for easy use in
other programs. The output can be piped (|) directly into other programs or
saved to a file for later use. Output with geographic coordinates (
-g)
is compatible with
v.in.ascii and can
be piped directly into this program.
r.profile -g input=elevation coordinates=... | v.in.ascii output=elevation_profile separator=space
The 2 column output is compatible with most plotting programs.
The optional RGB output provides the associated GRASS colour value for
each profile point.
Option units enables to set units of the profile length output.
If the units are not specified, current location units will be used.
In case of geographic locations (latitude/longitude), meters are used as default unit.
The profile resolution is measured exactly from the supplied end or
"turning" point along the profile. The end of a profile segment will be an
exact multiple of the profile resolution and will therefore not always match
the end point coordinates entered for the segmanet.
To extract the numbers in scripts, following parameters can be used:
r.profile input=dgm12.5 coordinates=3570631,5763556 2>/dev/null
This filters out everything except the numbers.
Extract a profile with coordinates (wayoints) provided on the command line
(North Carolina data set):
g.region raster=elevation -p
r.profile -g input=elevation output=profile_points.csv \
coordinates=641712,226095,641546,224138,641546,222048,641049,221186
This will extract a profile along the track defined by the three coordinate
pairs. The output file "profile_points.csv" contains
east,north,distance,value (here: elevation).
Coordinate pairs can also be "piped" into
r.profile (variant 2a):
r.profile elevation resolution=1000 file=- << EOF
641712,226095
641546,224138
641546,222048
641049,221186
EOF
Coordinate pairs can also be "piped" into r.profile (variant 2b):
echo "641712,226095
641546,224138
641546,222048
641049,221186" > coors.txt
cat coors.txt | r.profile elevation resolution=1000 file=-
The output is printed into the terminal (unless the
output parameter
is used) and looks as follows:
Using resolution: 1000 [meters]
Output columns:
Along track dist. [meters], Elevation
Approx. transect length: 1964.027749 [meters]
0.000000 84.661507
1000.000000 98.179062
Approx. transect length: 2090.000000 [meters]
1964.027749 83.638138
2964.027749 89.141029
3964.027749 78.497757
Approx. transect length: 995.014070 [meters]
4054.027749 73.988029
v.in.ascii,
r.what,
r.transect,
wxGUI profile tool
Bob Covill
SOURCE CODE
Available at:
r.profile source code
(history)
Latest change: Monday Feb 27 13:45:25 2023 in commit: a82501dc85294207e8e58437c3ec7f1056465ed4
Main index |
Raster index |
Topics index |
Keywords index |
Graphical index |
Full index
© 2003-2024
GRASS Development Team,
GRASS GIS 8.3.3dev Reference Manual