Note: This document is for an older version of GRASS GIS that has been discontinued. You should upgrade, and read the current manual page.
r.green - Computes the residual energy potential of different renewable energies like biomass or hydropower.
raster,
biomass topic
The
r.green suite computes the residual energy potential of different
renewable energies like biomass, ground source heat pumps, or hydropower.
The tool is organized in the module groups:
for which are composed of several programs considering different limits
(e.g. theoretical, recommended, legal, technical, ecological and economic constraints).
These different scenarios can be compared so that the residual energy
potential and the suitable places for constructing a new power plant can be identified.
All the modules of the tool r.green can be installed in GRASS GIS as following
(see also r.green.install):
The basis for creating the modules to calculate the energy potential is shown in the following image:
- Garegnani, G., Geri, F., Zambelli, P., Grilli, G., Sacchelli, S., Paletto, A., Curetti, G., Ciolli, M., Vettorato, D. (2015). A new open source DSS for assessment and planning of renewable energy: r. green. Proceedings of FOSS4G Europe, Como, 14-17. (PDF)
- Garegnani, G., Zambelli, P., Geri, F., Gros, J., D'Alonzo, V., Grilli, G., Sacchelli, S., Balest, J. Curetti, G., Paletto, A., Ciolli, M., Vettorato, D. (2015): Evaluation of renewable energy potential in Pilot Areas: a Decision Support System. (PDF)
r.green.install,
r.green.biomassfor,
r.green.gshp,
r.green.hydro
For authors and references, please refer to the respective module of
r.green.
SOURCE CODE
Available at:
Computes the residual energy potential of different renewable energies like biomass or hydropower source code
(history)
Accessed: Tuesday Jan 31 06:03:45 2023
Main index |
Topics index |
Keywords index |
Graphical index |
Full index
© 2003-2024
GRASS Development Team,
GRASS GIS 8.3.3dev Reference Manual