Note: This document is for an older version of GRASS GIS that is outdated. You should upgrade, and read the current manual page.
Geographic Resources Analysis Support System, commonly referred to as GRASS, is a Geographic Information System (GIS) used for geospatial data management and analysis, image processing, graphics/maps production, spatial modeling, and visualization. GRASS is currently used in academic and commercial settings around the world, as well as by many governmental agencies and environmental consulting companies.
This reference manual details the use of modules distributed with Geographic Resources Analysis Support System (GRASS), an open source (GNU GPL'ed), image processing and geographic information system (GIS).
Go to raster introduction
Go back to help overview
raster commands:
| r.average | Finds the average of values in a cover map within areas assigned the same category value in a user-specified base map. |
| r.basins.fill | Generates watershed subbasins raster map. |
| r.bilinear | Bilinear interpolation utility for raster map layers. |
| r.bitpattern | Compares bit patterns with a raster map. |
| r.blend | Blends color components of two raster maps by a given ratio. |
| r.buffer | Creates a raster map layer showing buffer zones surrounding cells that contain non-NULL category values. |
| r.carve | Generates stream channels. |
| r.category | Manages category values and labels associated with user-specified raster map layers. |
| r.circle | Creates a raster map containing concentric rings around a given point. |
| r.clump | Recategorizes data in a raster map by grouping cells that form physically discrete areas into unique categories. |
| r.coin | Tabulates the mutual occurrence (coincidence) of categories for two raster map layers. |
| r.colors | Creates/modifies the color table associated with a raster map layer. |
| r.colors.out | Exports the color table associated with a raster map layer. |
| r.colors.stddev | Set color rules based on stddev from a map's mean value. |
| r.composite | Combines red, green and blue raster maps into a single composite raster map. |
| r.compress | Compresses and decompresses raster maps. |
| r.contour | Produces a vector map of specified contours from a raster map. |
| r.cost | Creates a raster map showing the cumulative cost of moving between different geographic locations on an input raster map whose cell category values represent cost. |
| r.covar | Outputs a covariance/correlation matrix for user-specified raster map layer(s). |
| r.cross | Creates a cross product of the category values from multiple raster map layers. |
| r.describe | Prints terse list of category values found in a raster map layer. |
| r.digit | Interactive tool used to draw and save vector features on a graphics monitor using a pointing device (mouse) and save to a raster map. |
| r.distance | Locates the closest points between objects in two raster maps. |
| r.drain | Traces a flow through an elevation model on a raster map. |
| r.external | Link GDAL supported raster file to a binary raster map layer. |
| r.fill.dir | Filters and generates a depressionless elevation map and a flow direction map from a given elevation raster map. |
| r.fillnulls | Fills no-data areas in raster maps using spline interpolation. |
| r.flow | Constructs flow lines. |
| r.grow.distance | Generates a raster map containing distances to nearest raster features. |
| r.grow | Generates a raster map layer with contiguous areas grown by one cell. |
| r.gwflow | Numerical calculation program for transient, confined and unconfined groundwater flow in two dimensions. |
| r.his | Generates red, green and blue raster map layers combining hue, intensity and saturation (HIS) values from user-specified input raster map layers. |
| r.horizon | Horizon angle computation from a digital elevation model. |
| r.in.arc | Converts an ESRI ARC/INFO ascii raster file (GRID) into a (binary) raster map layer. |
| r.in.ascii | Converts ASCII raster file to binary raster map layer. |
| r.in.aster | Georeference, rectify and import Terra-ASTER imagery and relative DEM's using gdalwarp. |
| r.in.bin | Import a binary raster file into a GRASS raster map. |
| r.info | Output basic information about a raster map layer. |
| r.in.gdal | Import GDAL supported raster file into a binary raster map layer. |
| r.in.gridatb | Imports GRIDATB.FOR map file (TOPMODEL) into GRASS raster map |
| r.in.mat | Imports a binary MAT-File(v4) to a GRASS raster. |
| r.in.poly | Creates raster maps from ASCII polygon/line/point data files. |
| r.in.srtm | Import SRTM HGT files into GRASS |
| r.in.wms | Downloads and imports data from WMS servers. |
| r.in.xyz | Create a raster map from an assemblage of many coordinates using univariate statistics. |
| r.kappa | Calculate error matrix and kappa parameter for accuracy assessment of classification result. |
| r.lake | Fills lake at given point to given level. |
| r.le.patch | Calculates attribute, patch size, core (interior) size, shape, fractal dimension, and perimeter measures for sets of patches in a landscape. |
| r.le.pixel | Contains a set of measures for attributes, diversity, texture, juxtaposition, and edge. |
| r.le.setup | Interactive tool used to setup the sampling and analysis framework that will be used by the other r.le programs. |
| r.le.trace | Displays the boundary of each r.le patch and shows how the boundary is traced, displays the attribute, size, perimeter and shape indices for each patch and saves the data in an output file. |
| r.li.cwed | Calculates contrast weighted edge density index on a raster map |
| r.li.daemon | Support module for r.li landscape index calculations. |
| r.li.dominance | Calculates dominance's diversity index on a raster map |
| r.li.edgedensity | Calculates edge density index on a raster map, using a 4 neighbour algorithm |
| r.li | Landscape structure analysis package overview. |
| r.li.mpa | Calculates mean pixel attribute index on a raster map |
| r.li.mps | Calculates mean patch size index on a raster map, using a 4 neighbour algorithm |
| r.li.padcv | Calculates coefficient of variation of patch area on a raster map |
| r.li.padrange | Calculates range of patch area size on a raster map |
| r.li.padsd | Calculates standard deviation of patch area a raster map |
| r.li.patchdensity | Calculates patch density index on a raster map, using a 4 neighbour algorithm |
| r.li.patchnum | Calculates patch number index on a raster map, using a 4 neighbour algorithm. |
| r.li.pielou | Calculates Pielou's diversity index on a raster map |
| r.li.renyi | Calculates Renyi's diversity index on a raster map |
| r.li.richness | Calculates richness index on a raster map |
| r.li.setup | Configuration editor for r.li.'index' |
| r.li.shannon | Calculates Shannon's diversity index on a raster map |
| r.li.shape | Calculates shape index on a raster map |
| r.li.simpson | Calculates Simpson's diversity index on a raster map |
| r.los | Line-of-sight raster analysis program. |
| r.mapcalc | Raster map calculator. |
| r.mapcalculator | Calculate new raster map from a r.mapcalc expression. |
| r.mask | Creates a MASK for limiting raster operation. |
| r.median | Finds the median of values in a cover map within areas assigned the same category value in a user-specified base map. |
| r.mfilter.fp | Raster map matrix filter. |
| r.mfilter | Performs raster map matrix filter. |
| r.mode | Finds the mode of values in a cover map within areas assigned the same category value in a user-specified base map. |
| r.neighbors | Makes each cell category value a function of the category values assigned to the cells around it, and stores new cell values in an output raster map layer. |
| r.null | Manages NULL-values of given raster map. |
| r.out.arc | Converts a raster map layer into an ESRI ARCGRID file. |
| r.out.ascii | Converts a raster map layer into an ASCII text file. |
| r.out.bin | Exports a GRASS raster map to a binary array. |
| r.out.gdal | Exports GRASS raster maps into GDAL supported formats. |
| r.out.gdal.sh | Exports GRASS raster into GDAL supported formats. |
| r.out.gridatb | Exports GRASS raster map to GRIDATB.FOR map file (TOPMODEL) |
| r.out.mat | Exports a GRASS raster to a binary MAT-File. |
| r.out.mpeg | Raster File Series to MPEG Conversion. |
| r.out.png | Export GRASS raster as non-georeferenced PNG image. |
| r.out.pov | Converts a raster map layer into a height-field file for POVRAY. |
| r.out.ppm3 | Converts 3 GRASS raster layers (R,G,B) to a PPM image file at the pixel resolution of the CURRENTLY DEFINED REGION. |
| r.out.ppm | Converts a GRASS raster map to a PPM image file at the pixel resolution of the currently defined region. |
| r.out.tiff | Exports a GRASS raster map to a 8/24bit TIFF image file at the pixel resolution of the currently defined region. |
| r.out.vrml | Export a raster map to the Virtual Reality Modeling Language (VRML) |
| r.out.vtk | Converts raster maps into the VTK-Ascii format |
| r.out.xyz | Export a raster map to a text file as x,y,z values based on cell centers. |
| r.pack | Packs up a raster map and support files for copying. |
| r.param.scale | Extracts terrain parameters from a DEM. |
| r.patch | Creates a composite raster map layer by using known category values from one (or more) map layer(s) to fill in areas of "no data" in another map layer. |
| r.plane | Creates raster plane map given dip (inclination), aspect (azimuth) and one point. |
| r.profile | Outputs the raster map layer values lying on user-defined line(s). |
| r.proj | Re-projects a raster map from one location to the current location. |
| r.quant | Produces the quantization file for a floating-point map. |
| r.quantile | Compute quantiles using two passes. |
| r.random.cells | Generates random cell values with spatial dependence. |
| r.random | Creates a raster map layer and vector point map containing randomly located points. |
| r.random.surface | Generates random surface(s) with spatial dependence. |
| r.reclass.area | Reclasses a raster map greater or less than user specified area size (in hectares). |
| r.reclass | Reclassify raster map based on category values. |
| r.recode | Recodes categorical raster maps. |
| r.region | Sets the boundary definitions for a raster map. |
| r.regression.line | Calculates linear regression from two raster maps: y = a + b*x. |
| r.report | Reports statistics for raster maps. |
| r.resamp.interp | Resamples raster map layers to a finer grid using interpolation. |
| r.resample | GRASS raster map layer data resampling capability. |
| r.resamp.rst | Reinterpolates and optionally computes topographic analysis from input raster map to a new raster map (possibly with different resolution) using regularized spline with tension and smoothing. |
| r.resamp.stats | Resamples raster map layers to a coarser grid using aggregation. |
| r.rescale.eq | Rescales histogram equalized the range of category values in a raster map layer. |
| r.rescale | Rescales the range of category values in a raster map layer. |
| r.ros | Generates three, or four raster map layers showing 1) the base (perpendicular) rate of spread (ROS), 2) the maximum (forward) ROS, 3) the direction of the maximum ROS, and optionally 4) the maximum potential spotting distance. |
| r.series | Makes each output cell value a function of the values assigned to the corresponding cells in the input raster map layers. |
| r.shaded.relief | Creates shaded relief map from an elevation map (DEM). |
| r.sim.sediment | Sediment transport and erosion/deposition simulation using path sampling method (SIMWE). |
| r.sim.water | Overland flow hydrologic simulation using path sampling method (SIMWE). |
| r.slope.aspect | Generates raster maps of slope, aspect, curvatures and partial derivatives from a elevation raster map. |
| r.spread | Simulates elliptically anisotropic spread on a graphics window and generates a raster map of the cumulative time of spread, given raster maps containing the rates of spread (ROS), the ROS directions and the spread origins. |
| r.spreadpath | Recursively traces the least cost path backwards to cells from which the cumulative cost was determined. |
| r.statistics | Calculates category or object oriented statistics. |
| r.stats | Generates area statistics for raster map layers. |
| r.sum | Sums up the raster cell values. |
| r.sun | Solar irradiance and irradiation model. |
| r.sunmask | Calculates cast shadow areas from sun position and elevation raster map. |
| r.support | Allows creation and/or modification of raster map layer support files. |
| r.support.stats | Update raster map statistics |
| r.surf.area | Surface area estimation for rasters. |
| r.surf.contour | Surface generation program from rasterized contours. |
| r.surf.fractal | Creates a fractal surface of a given fractal dimension. |
| r.surf.gauss | GRASS module to produce a raster map layer of gaussian deviates whose mean and standard deviation can be expressed by the user. It uses a gaussian random number generator. |
| r.surf.idw2 | Surface generation program. |
| r.surf.idw | Surface interpolation utility for raster map. |
| r.surf.random | Produces a raster map of uniform random deviates whose range can be expressed by the user. |
| r.terraflow | Flow computation for massive grids (float version). |
| r.texture | Generate images with textural features from a raster map. |
| r.thin | Thins non-zero cells that denote linear features in a raster map. |
| r.tileset | Produces tilings of the source projection for use in the destination region and projection. |
| r.timestamp | Modifies a timestamp for a raster map. |
| r.topidx | Creates topographic index map from elevation raster map. |
| r.topmodel | Simulates TOPMODEL which is a physically based hydrologic model. |
| r.to.rast3elev | Creates a 3D volume map based on 2D elevation and value raster maps. |
| r.to.rast3 | Converts 2D raster map slices to one 3D raster volume map. |
| r.to.vect | Converts a raster map into a vector map. |
| r.transect | Outputs raster map layer values lying along user defined transect line(s). |
| r.univar | Calculates univariate statistics from the non-null cells of a raster map. |
| r.univar.sh | calculates univariate statistics from a GRASS raster map |
| r.unpack | Unpacks a raster map packed with r.pack. |
| r.volume | Calculates the volume of data "clumps", and (optionally) produces a GRASS vector points map containing the calculated centroids of these clumps. |
| r.walk | Outputs a raster map layer showing the anisotropic cumulative cost of moving between different geographic locations on an input elevation raster map layer whose cell category values represent elevation combined with an input raster map layer whose cell values represent friction cost. |
| r.water.outlet | Creates watershed basins. |
| r.watershed | Watershed basin analysis program. |
| r.what.color | Queries colors for a raster map layer. |
| r.what | Queries raster map layers on their category values and category labels. |
Help Index | Full Index
© 2003-2014 GRASS Development Team, GRASS GIS 6.5.svn Reference Manual
